-
Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable anatomic models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.
Alert (6/17/22) - The democratiz3D scan-to-model conversion app is down due to a technical issue. We are working on a solution.
Skull and Face
Files related to 3D printing skulls.
2,943 files
-
Skull_RS - processed
Skull_RS - processed
3D, model, .stl, bone, printable, nasal, septum, zygomatic, arch, maxilla, clinoid, apophysis, sphenoid, temporal, frontal, petrous, ridge, dens, upper, teeth, orbit, head, cervical, spine, mandible, lower, incisor, canine, premolar, molar,
1 download
0 comments
Updated
-
Prova2stl - processed
Prova2stl - processed
3D, model, .stl, bone, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, clavicle, scapula, ribs, sternum, sternocostoclavicular joint, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
Prova2 - processed
Prova2 - processed
.stl, 3d, model, axial, frontal, temporal, parietal, occipital, ethmoid, cells, nasal, septum, lower, turbinate, petrous, ridge, cerebellum, paranasal, sinuses, maxillary, sinus, sphenoid, orbit, mastoid, clinoid, apophysis, optic, nerve
1 download
0 comments
Updated
-
Facial CT - processed
Facial CT - processed,
Frontal sinus, Roof of the orbit, Crista galli, Innominate line, Sphenoid, Petrous ridge, Lateral wall of the orbit, Zygomatic bone, Anterior ethmoid sinus, Internal auditory canal, Nasal septum, Maxillary sinus, Nasal cavity, Dens, .STL, bone, 3d, model,
1 download
- frontal sinus roof of the orbit
- crista galli
- (and 15 more)
0 comments
Updated
-
c0147 Skull, Male 62yo - processed
By Terrie S
c0147 Skull, Male 62yo - processed, head, skull, bone, 3d model, mandible, maxilla, orbit, nasal, teeth, alveolar, zygomatic, arch, occipital, temporal, frontal, parietal, printable
11 downloads
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed, 3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
1 download
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed
3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
1 download
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed
3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed, 3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed
3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
ct1 - processed
By manuloft
ct1 - processed, 3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
Arch - processed
By valchanov
Arch - processed
3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal, Anterior arch of the atlas, Base of the skull, Odontoid process, Posterior arch of the atlas, Spinous process, Body of the axis, Anterior superior margin of the vertebra, Transverse process, Anterior inferior margin of the vertebra
1 download
0 comments
Updated
-
CTA Neck and skull base
By Dr. Mike
This CT Angiogram of the neck and head shows the arteries of the neck, face, and intracranial regions in high resolution.
Model details:
File format: STL
vertices 399130
triangles 799096
Model is manifold (error free) and ready for 3D printing.
This model was created using the democratiz3D service.
31 downloads
- cta
- ct angiogram
- (and 3 more)
-
NRRD Vet All Private - processed
By embodi3d
NRRD Vet All Private - processed
3D, model, .stl, printable, bone, nasal, septum, zygomatic, arch, maxilla, apophysis, mastoid, temporal, frontal, upper, teeth, orbit, mandible, cervical, spine, head, skull occipital, parietal,
0 downloads
0 comments
Updated
-
Craniosynostosis
By hnekooei
Printing Tip:
This case is printed easier if you cut it into two pieces, like the image. This way, printing will require less support and the surgeon or the observer will have the chance to look inside.
Case like this could get tricky and may require some patience.
31 downloads
0 comments
Submitted
-
Male, 43yo, Bifid Nasal Spine
By Terrie S
This is a skull of a 43yo male that I modeled from TCIA from the QIN-HEADNECK collection, which is available under a Creative Commons Attribution 3.0 Unported License. I modeled it in Mimics and cleaned it up (as best I could) for printing with Meshlab and Meshmixer.
I have printed it on a Robo3D. To prep for printing, I used the Plane Cut tool in Meshmixer to slice posterior to the mandible, making a front and back half. Then I cut the front half down the midsagittal line. I used white MakerBot PLA, 200 micron resolution, outer perimeter print speed of 20 mm/s, 3 perimeter shells, 25% infill.
I have printed the two halves of the front but not the back yet!
24 downloads
0 comments
Submitted
-
Skull Repair
By dwpemberton
This is an STL file of Skull that has been repaired. The original Dicom data was from the Osirix image database (Phenix). I exported the STL file from the CT scan and post processed it in Meshmixer to correct the mesh defects. The original file was 115 mb with over 500,000 faces. I imported the STL file into Blender and used the decimation function to reduce the number of faces to less than 100,000. This file is free to use as long as credit for the original data is referenced back to Osirix.
30 downloads
-
Skull rpr dcm 15 percent
By dwpemberton
This is a high resolution scan of a Skull repair. The original Dicom data came from the Osirix site (Phenix). I repaired the mesh from the original export file (115 mb) with Meshmixer. I then used Blender to Decimate the file to 15% of the original number of faces which took the file size down to about 4 mb. This file is free to use for study with the original credit for the data going to the Osirix site for the raw data.
15 downloads
0 comments
Submitted
-
Left Bony Labyrinth
By Nicola
This file is a micro segmentation of bony labyrinth taken from a CT scan. I paid particular attention to the vestibule bone with its 2 windows, the cochlea and the semicircular canals. To exhibit all bony labyrinth I eliminated the middle ear structures, but I kept the hammer, the incus and the facial nerve canal. you can observe the course of the facial nerve canal in its three portions with two knees and with his natural dehiscences.
I also left in place the internal auditory canal and the internal auditory meatus where are visible the facial cochlear and vestibular nerves openings with the bony eminences that separate them (Bill's Bar, Crista falciformis).
You can open the file with any program for managing files .stl and navigate in three dimensions between or within the bony structures (I do with the program called Preview in Mac) to facilitate the study of these complex structures. I added screenshots which shows the most important structures.
The file is already ready to be printed and does not need cleaning.
The dimensions are X: 21.3 mm, Y: 16.4 mm, Z: 16.4 mm (2x1.6x1.6 cm).
You can easily increase the size if you want to print a solid model of the inner ear
P.S. I spent many hours to this work and would like to have your opinions and suggestions on where to improve. I provide for those who want the file at different stages of processing
Nicola Di Giuseppe
45 downloads
-
Temporal Bone Left
By Nicola
This is a .stl file of a left temporal bone ready for 3d printing.
I have segmented a CT scan paying attention to all the important bony structures of the ear.
In the .stl screenshots you can see the mastoid, malleus, incus, the bony canal of the facial nerve, the stylomastoid foramen Etc.
I do this for my training and the idea is to perform a mastoidectomy just in my desktop
i have printed my personal 3d plaster model (you can see in the screenshots) but i haven't the courage to destroy it with the drill.....
I hope that my work can be of help to anyone who wants to try to drill a faithful model of temporal bone at home or simply want to study the anatomy in a versatile 3d .stl Model
Good Job
Nicola Di Giuseppe M.D.
75 downloads
- mastoid
- mastoid cells
- (and 8 more)
-
Adult Male Skull-Sagittal, Right Side, 1:1 scale
By descobar3d
Adult male skull. Right side, sagittal view. The skull is 1:1 scale from .dicom images. To print a 1:1scale your 3D printer build volume must be at least 10x10x8 inches. File can be scaled down to fit other printers
0 downloads
- right side
- scale
- (and 2 more)
-
Full size skull base in two parts for Formlabs printers
By Dr. Mike
This full-size skull base was created from a CT scan and formatted for printing on Formlabs printers. The model clearly shows the anatomy of the skull base, including the foramina (holes) that allow the cranial nerves and blood vessels to enter the skull. Great as an educational tool for teaching anatomy. The two halves have notches which makes fitting them together easy.
The files are in the .form file format, and are readable by Formlabs native PreForm software, which works on the Form1, Form1+, and Form2 printers. There are two files: right and left. The left model has a build volume of 179 mL, and the right 138 mL, for a total volume of 317 mL. The pictures show the two parts after printing and after they have been cleaned.
4 downloads
0 comments
Updated
-
Naso SphenoEthmoid Complex segmented whit cranio-nasal fistula
By Nicola
This is 3d Printed Resin model of nasal fossa, labyrinth of ethmoid, sphenoyd and Skull base of patient whit
cerebrospinal fluid rhinorrea by cranio-nasal Fistula. My intention was to print a solid 3d model for presurgical study.
Nicola Di Giuseppe M.D.
21 downloads
- rhinoliquorrea
- CFS leak
- (and 5 more)
0 comments
Updated
-
Skull STL in two halves
By Dr. Mike
This 3D printable skull created from a CT scan is printable in two halves that fit together. The skull can be opened to reveal the detailed anatomy of the inside of the skull. It can be printed at full size or scaled to your needs (such as the half-size print shown in the photos).
The file is distributed under the Creative Commons Attribution – NonCommercial – NoDerivs License.
105 downloads
0 comments
Updated
-
File Pack for 3D Printing with Osirix Tutorial
By Dr. Mike
UPDATE: There is an improved tutorial that shows you how to create 3D printable bone models even more easily and for free on any operating system. Click here to learn more.
This file pack contains files to accompany the tutorial "Creating 3D Printable Models from Medical Scans in 30 Minutes Using Free Software: Osirix, Blender, and Meshmixer." Download the files to follow along with the tutorial and create a 3D printed model yourself!
If you haven't registered, please do so. Registration is free and only takes a minute.
Included files:
TCGA-06-5410 sharp.zip - contains the DICOM files with an anonymized research CT scan used to create the skull model skull file.zip - Contains the uncorrected, raw STL file generated from Osirix. skull file corrected.zip - Contains the skull STL file after correcting mesh errors in Blender. skull file corrected preform.zip - Contains the .form file of the corrected STL. This is the file format used with the Formlabs Form1+ printer. If you have this type of printer, download this file and print yourself. All files are compressed with zip.
4,729 downloads