Jump to content
  • Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable anatomic models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.

COVID-19

Sign in to follow this  

Files related to the fight against the COVID-19 coronavirus (SARS-CoV-2). 

12 files

  1. Free

    N95 mask holder for UV sterilization box (2 mask holder)

    This is a 3D printable holder for N95 masks as featured in the DIY UV sterilization box video below. This is the two mask holder. Click here for the one-mask holder. The mask holding segments are stackable and can be stacked up to 4 levels high. They are designed to fit a standard 3M healthcare N95 mask and grip it so it does not fall out. The backside of the holder is open to faciliate cleaning (such as with UV light) of the inside portion of the mask as well as the outside. This holder can be printed in 11 separate sections that are then easily assembled in about a minute or two. Assembly instructions are included with the download.
     
    This is the two mask holder. Click here for the one-mask holder. 

    If you want to order sets of 6 3D printed for you, you may do here (single mask holder 6-pack, double mask holder 6-pack)
     
     
     
    You may download and 3D print this file yourself for non-commercial use under the Non-Commercial Creative Commons license (CC-BY-NC-ND). If you wish to use this for commercial purposes (e.g. manufacturing and selling printed parts), please contact me for a license. Registered members can message me at any time.  You must be logged in to send messages. 

    1,335 downloads

       (1 review)

    0 comments

    Updated

  2. Free

    Sectional Anatomy Pulmonar Px with COVID19

    Six slicer of lung. 
    Female with COVID19 
    Profile Gcode ender 3 pro 
     
    anatomy, seccional, lung, lateral, right, left, covid-19, coronavirus, upper, lower, medical, medicine, slice,

    8 downloads

       (0 reviews)

    0 comments

    Updated

  3. Free

    Px's whit covid 19

    Patient Female
    StudyDescription CT PE Chest
    SerieDescription 3mm
    Modality TC 
    BodyPartExamined CHEST
    ContrasAgent    CONTRAST
    COVID 19
     
     
    Source: TCIA Browser Covid 19  
     
    lung, medical, .stl, 3d, model, printable, printing, organ, bronchi, right, left, upper, lower, base, covid-19, coronavirus,

    24 downloads

       (0 reviews)

    0 comments

    Updated

  4. Free

    MUSCLES PX WHIT COVID-19

    Extraction of different caracteristics of the same study. Muscles,  covid-19, radiology, covid-19, abdomen, pelvic, .stl, 3d, model, printable, printing, medical, medicine, diaphragm, muscle, psoas, ct, scan, with, contrast, aorta, descendent, ventricle, septum, auricle, mediastinum, liver, portal, gallbladder, small, bowel, colon, ascendent, lumbar, spine, intervertebral, disc, transverse, spinous, process, hip, head, trochanter, diaphysis, epiphysis, spleen, kidney, whole, body, rectum, sigmoid, gluteus, sacrum, foramina,

    1 download

       (0 reviews)

    0 comments

    Updated

  5. Free

    skelete of px whit covid-19

    Extraction of different caracteristics of the same study. BONES
     covid-19, radiology, covid-19, abdomen, pelvic, .stl, 3d, model, printable, printing, medical, medicine, diaphragm, muscle, psoas, ct, scan, with, contrast, aorta, descendent, ventricle, septum, auricle, mediastinum, liver, portal, gallbladder, small, bowel, colon, ascendent, lumbar, spine, intervertebral, disc, transverse, spinous, process, hip, head, trochanter, diaphysis, epiphysis, spleen, kidney, whole, body, rectum, sigmoid, stomach, 

    2 downloads

       (0 reviews)

    0 comments

    Updated

  6. Free

    TCMD abdominopelvic covid 19

    TCMD 
    PX whit covid-19, radiology, covid-19, abdomen, pelvic, .stl, 3d, model, printable, printing, medical, medicine, diaphragm, muscle, psoas, ct, scan, with, contrast, aorta, descendent, ventricle, septum, auricle, mediastinum, liver, portal, gallbladder, small, bowel, colon, ascendent, lumbar, spine, intervertebral, disc, transverse, spinous, process, hip, head, trochanter, diaphysis, epiphysis, spleen, kidney, whole, body, rectum, sigmoid,

    2 downloads

       (0 reviews)

    0 comments

    Updated

  7. Free

    Covid19 infected lung

    Covid19 infected lung, infected lung part shown semi-tranparent.
     
    Dataset downloaded below, which marked as case4 at site. 
    http://covidctscans.org/
     
    lung, .stl, 3d, model, printable, upper, lower, trachea, covid-19, coronavirus, organ, bronchi, lobes, medium, infection, medical, medicine, bronchi, pneumonia, trachea, cartilage,

    276 downloads

       (0 reviews)

    2 comments

    Updated

  8. Free

    Quick Change Face Shield

    These are the pieces needed to make a face shield. It is designed to use laminator pouches as the shield as they are inexpensive and can be disposed instead of sterilized. The design is similar to the Prusa face shield but with a couple significant differences. With this version there is no need to punch holes in the shield, they just friction fit.  The fastener for the elastic headband is easily adjustable and the brow piece has a compound curve so that it is significantly more comfortable during prolonged use.
    This design now has a cap that snaps in place and seals off the top of the mask. Being removable both makes it optional and much easier to clean.
    Feel free to use it as you would like, just please do not charge anyone for the finished product other than supplies.

    43 downloads

       (0 reviews)

    0 comments

    Updated

  9. Free

    Hepa Filter Holder for BVMs

    This is a HEPA filter holder for BVMs. I designed this filter holder because of a shortage of commercial products. The filters were 1.25 inch square made from HEPA rated vacuum cleaner bags rated "HEPA Media Traps 99.97% of Particles Down to 0.3 Microns".
    Also included is a box for storage of replacement HEPA filters.
    I used 75% infill because they were being used by ambulance teams. I used PETG because it is water and chemical resistance. Soaked some in 70% alcohol and some in 25% bleach without any visual affects. Nozzle 260C, bed 70C, flow 60% and cooling 50%
    PLEASE NOTE: I do not have the knowledge nor equipment to verify the level of protection!
    It is the responsibility of the user to determine the actual level of protection and use it accordingly!

    15 downloads

       (0 reviews)

    0 comments

    Updated

  10. Free

    N95 mask holder for UV sterilization box (set of 6 two mask holders)

    This is a set of 6 3D printable holders for N95 masks as featured in the DIY UV sterilization box video below. The mask holding segments are stackable and can be stacked up to 4 levels high. They are designed to fit a standard 3M healthcare N95 mask and grip it so it does not fall out. The backside of the holder is open to faciliate cleaning (such as with UV light) of the inside portion of the mask as well as the outside. This holder can be printed in 6 separate sections that are then easily assembled in about a minute or two. Assembly instructions are included with the download.
     
    This is the set of 6 two-mask holders that can be ordered 3D printed. For the set of 6 one-mask holders, click here.
    Click for the individual one-mask holder and individual two-mask holder. Files for download are the same for all holders. 
     
     
     
    You may download and 3D print this file yourself for non-commercial use under the Non-Commercial Creative Commons license (CC-BY-NC-ND). If you wish to use this for commercial purposes (e.g. manufacturing and selling printed parts), please contact me for a license. Registered members can message me at any time. You must be logged in to send messages.

     

    597 downloads

       (3 reviews)

    0 comments

    Updated

  11. Free

    N95 mask holder for UV sterilization box (set of 6 one mask holders)

    This is a set of 6 3D printable holders for N95 masks as featured in the DIY UV sterilization box video below. The mask holding segments are stackable and can be stacked up to 4 levels high. They are designed to fit a standard 3M healthcare N95 mask and grip it so it does not fall out. The backside of the holder is open to faciliate cleaning (such as with UV light) of the inside portion of the mask as well as the outside. This holder can be printed in 6 separate sections that are then easily assembled in about a minute or two. Assembly instructions are included with the download.
     
    This is the set of 6 one mask holders that can be ordered 3D printed. For the set of 6 two mask holders, click here.
    Click for the individual one-mask holder and individual two-mask holder. Files for download are the same for all holders. 
     
     
     
    You may download and 3D print this file yourself for non-commercial use under the Non-Commercial Creative Commons license (CC-BY-NC-ND). If you wish to use this for commercial purposes (e.g. manufacturing and selling printed parts), please contact me for a license. Registered members can message me at any time (must be logged in).

    117 downloads

       (0 reviews)

    0 comments

    Updated

  12. Free

    N95 mask holder for UV sterilization box (1 mask holder)

    This is a 3D printable holder for N95 masks as featured in the DIY UV sterilization box video below. The mask holding segments are stackable and can be stacked up to 4 levels high. They are designed to fit a standard 3M healthcare N95 mask and grip it so it does not fall out. The backside of the holder is open to faciliate cleaning (such as with UV light) of the inside portion of the mask as well as the outside. This holder can be printed in 6 separate sections that are then easily assembled in about a minute or two. Assembly instructions are included with the download.
     
    This is the one mask holder. Click here for the two-mask holder.
     
    If you want to order the holders printed you may do so in sets of 6 here (single mask holder 6-pack, double mask holder 6-pack)
     
     
     
    You may download and 3D print this file yourself for non-commercial use under the Non-Commercial Creative Commons license (CC-BY-NC-ND). If you wish to use this for commercial purposes (e.g. manufacturing and selling printed parts), please contact me for a license. Registered members can message me at any time. You must be logged in to send messages.

    385 downloads

       (0 reviews)

    0 comments

    Updated

Sign in to follow this  

  • File Reviews

  • File Comments

  • Recent Forum Posts

    • Hello ! 😊 I don't know if it's the right place for my question... I'm doing an engineering internship and I have to model the fall of a knee joint (using Ansys). I have such a complex geometry of the knee joint (cancellous bone, cortical bone, 2 ligaments and meniscus) but I want to add the patellar and the quadriceps tendon and I don't know how to do it 😕 Can someone here help me ? Regards, Elisabeth
    • Hi,   I converted a CBCT to an STL file. I am trying to import the STL to Chitubox so I can create a print on the Elegoo Mars Pro. I am struggling to understand how to import the STL so that it is true to size.    Any help would be much appreciated. 🙂  
    • 1.dcm 2.dcm 3.dcm 4.dcm 5.dcm 6.dcm 7.dcm 8.dcm 9.dcm
    • Hello,   Here for sale is my Makerbot Method X 3d printer valued at $3800. This printer is basically brand new only used once to make sure it wasn't damaged during shipping. The overall appearance of the printer is excellent with no faults, wears at all and has been cared for incredibly well.   WHATS INCLUDED MakerBot Method qX 3D Printer 1 Spring Steel Build Plate 1 Performance Extruder 1 Model 1 Performance Extruder 2 Support 1 Nozzle Brush 1 Hex Key 1 USB A-to-B Cable 1 US Power Cord 1 EU Power Cord   Please Note: No materials are included in the sale. Removal of SR-30 support material requires Circulation Tank and Ecoworks™ cleaning agent available from 3rd-party resellers.   Materials PLA, PETG, TOUGH ABS, ASA Support PVA SR-30   If you have any questions or need further information or images about the printer please PM.
    • I am selling my barely used Formlabs Form 3B Printer with a few extra accessories I bought earlier last year. This 3D printer is in impeccable shape, barely any uses after I ran a few prints through it. Everything included looks almost completely new, no issues and prints perfectly. The galvo mirrors are squeaky clean as well as the laser mirror and glass, the build plates are also fine with no signs of scrape marks and as well the lots of extra materials, all in perfect condition. Great for use in a dental lab, dental office or home enthusiasts.   Here is what you are getting:  Formlabs Form 3B printer (only 17 total prints and rollover warranty ending in April 2022), UV cure station & Wash station, Form 3 Resin tank V2.1, Build plate, 2x Resin cartridges, Finish kit and Original boxes.   Asking $5200/obo.   Feel free to DM for more pictures or details if you are interested! 
×
×
  • Create New...