Jump to content

N95 mask holder for UV sterilization box (set of 6 two mask holders) 1.0.0

   (3 reviews)
Dr. Mike
 Share

9 Screenshots

About This File

This is a set of 6 3D printable holders for N95 masks as featured in the DIY UV sterilization box video below. The mask holding segments are stackable and can be stacked up to 4 levels high. They are designed to fit a standard 3M healthcare N95 mask and grip it so it does not fall out. The backside of the holder is open to faciliate cleaning (such as with UV light) of the inside portion of the mask as well as the outside. This holder can be printed in 6 separate sections that are then easily assembled in about a minute or two. Assembly instructions are included with the download.

 

This is the set of 6 two-mask holders that can be ordered 3D printed. For the set of 6 one-mask holders, click here.

Click for the individual one-mask holder and individual two-mask holder. Files for download are the same for all holders. 

 

 

 

You may download and 3D print this file yourself for non-commercial use under the Non-Commercial Creative Commons license (CC-BY-NC-ND). If you wish to use this for commercial purposes (e.g. manufacturing and selling printed parts), please contact me for a license. Registered members can message me at any time. You must be logged in to send messages.


 

 Share
Next File N95 mask holder for UV sterilization box (set of 6 one mask holders)

User Feedback

You may only provide a review once you have downloaded the file.

embodi3d

embodi3d 70

   0 of 2 members found this review helpful 0 / 2 members

This is an example of a 6 unit double mask holder set we 3D printed for a customer (holds 12 masks). Parts came out fine with no problem and will be easy to assemble by snapping together using the included instruction sheet. Excellent print!

 

If you are interested in having us print these parts for you, either because you don't have a printer or don't want to wait ages to print all these individual parts, you can order the prints from us by clicking on the "Order 3D Print" button above.

 

20200419_090904.jpg

 

 

Link to review
pjmcguirk

pjmcguirk 2

  

Received my N95 holders in 3 says put them together and were using them within 10 minutes. I have a dental practice and as everyone knows the N95 masks are in short supply, so anything that will help extend their usage is beneficial. They work very well.

Link to review
hlacoss

hlacoss 1

  

This is a nicely-designed assembly.  I found that the forks were a little bit fragile when assembling due to the tight fit (tight fit is a good thing), so, if you choose to print this yourself instead of having it printed, be aware of applying too much force.

IMG_1964.JPG

Link to review
×
×
  • Create New...