Jump to content
  • Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable medical models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.

Skin

Sign in to follow this  

3D printable files of skin of the human body

266 files

  1. Free

    Human hand - stl file processed

    Human hand - stl file processed
    3dmodel, stl, finger, wrist, skin

    69 downloads

       (0 reviews)

    0 comments

    Updated

  2. Free

    Tutorial head and neck - processed

    3D printable head STL created from a CT scan. This model was created as part of this tutorial on created skin 3D printable models from medical CT scans.

    43 downloads

       (0 reviews)

    0 comments

    Updated

  3. Free

    plastic hand - stl file processed

    plastic hand - stl file processed

    This file was created with democratiz3D. Automatically create 3D printable models from CT scans. Learn more.
     
    skin, 3d, model, printable, plastic, hand, reconstruction, volume, .stl, fingers, nails, carpal, metacarpal, phalanx, proximal, media, distal, thenar, hypothernar, thumb, index, middle, pointer, ring, pinky, right, upper, limb

    16 downloads

       (0 reviews)

    0 comments

    Updated

  4. Free

    Right knee - Skin model STL file from converted CT scan

    The knee joint is formed by three bones: the femur, the tibia and the patella. the knee joint is the largest synovial joint and provides the flexion and extension movements of the leg as well as relative medial and lateral rotations while in relative flexion.

    The knee joint articulations are two condylar joints between the femur and the tibia as well as a joint between the patella and the femur. Although the fibula is closely related to the knee joint but it doesn't share in articulation.   The knee joint is also formed by some ligaments and cartilage called (menisci) which are best imaged by MRI.   This 3D model was created from the file STS_051   The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    15 downloads

       (0 reviews)

    0 comments

    Updated

  5. Free

    right-pelvis-2 - stl file processed

    right-pelvis-2 - stl file processed
     
    3d model, stl, gluteus, pelvis, hip, vagina, genitalia, skin, tigh, femur, lumbar, spine, sacrum

    This file was created with democratiz3D. Automatically create 3D printable models from CT scans. Learn more.

    14 downloads

       (0 reviews)

    0 comments

    Updated

  6. Free

    Left foot - Skin model STL file from converted CT scan

    The foot is a highly developed, biomechanically complex structure that serves to bear the weight of the body.
      The foot can be divided into 3 parts: the hindfoot, the midfoot, and the forefoot. The hindfoot is composed of 2 of the 7 tarsal bones, the talus, and the calcaneus; the midfoot contains the rest of the tarsal bones; and the forefoot contains the metatarsals and the phalanges.   This 3D model was created from the file STS_039   The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    13 downloads

       (0 reviews)

    0 comments

    Updated

  7. Free

    Normal Left Foot and Ankle Skin Model 3D Printable STL File Converted from CT Scan

    This is the normal right foot and ankle skin model of a 56-year-old male with right anterior thigh pleomorphic leiomyosarcoma. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Topographical landmarks of the foot and ankle consist of muscular, tendinous, and bony structures. Proximally, the superficial muscles of the anterior (tibialis anterior), lateral (peroneals) and posterior (gastrocnemius) compartments may be palpated. Anteriorly, the tibialis anterior tendon crosses the ankle joint and is used as a landmark for ankle joint injections and aspirations, where the practitioner will place the needle just lateral to the tendon. Posteriorly, the gastrocnemius and soleus converge to form the Achilles tendon. Ruptures of the tendon, as well as tendinous changes due to Achilles tendinopathy, may be palpated. At the level of the ankle joint, the joint line, medial malleolus (distal tibia) and lateral malleolus (distal fibula) may be palpated. The extensor hallucis longus and extensor digitorum longus tendons are visible on the surface of the dorsal foot. The extensor digitorum brevis muscle belly is seen on the dorsum of the lateral foot. On the plantar foot, the plantar fascia may be palpated. Nodules associated with plantar fascial fibromatosis may be palpated here. Plantar fasciitis is also diagnosed when pain is associated with palpation of the insertion of the plantar fascia on the medial heel. Other common pathologies on the plantar foot are ulcerations associated with diabetic neuropathy and other neuropathic conditions.
     
    This model was created from the file STS_014.
     

    12 downloads

       (0 reviews)

    0 comments

    Updated

  8. Free

    female phantom meditism - stl file processed

    female phantom meditism - stl file processed, chest, female, breast, skin, thorax, abdomen

    11 downloads

       (0 reviews)

    0 comments

    Updated

  9. Free

    Normal Left Foot and Ankle Skin Model 3D Printable STL File Converted from CT Scan

    This model is the left foot and ankle skin rendering of a 65-year-old male with left thigh myxoid fibrosarcoma. At the time of diagnosis, the patient had metastases to his lungs. The patient therefore underwent neoadjuvant radiotherapy, surgery, and adjuvant chemotherapy and was found to have an intermediate grade lesion at the time of diagnosis. The patient unfortunately died 9.5 months after diagnosis. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Topographical landmarks of the foot and ankle consist of muscular, tendinous, and bony structures. Proximally, the superficial muscles of the anterior (tibialis anterior), lateral (peroneals) and posterior (gastrocnemius) compartments may be palpated. Anteriorly, the tibialis anterior tendon crosses the ankle joint and is used as a landmark for ankle joint injections and aspirations, where the practitioner will place the needle just lateral to the tendon. Posteriorly, the gastrocnemius and soleus converge to form the Achilles tendon. Ruptures of the tendon as well as tendinous changes due to Achilles tendinopathy may be palpated. At the level of the ankle joint, the joint line, medial malleolus (distal tibia) and lateral malleolus (distal fibula) may be palpated. The extensor hallucis longus and extensor digitorum longus tendons are visible at the surface of the dorsal foot. The extensor digitorum brevis muscle belly is seen on the dorsum of the lateral foot. On the plantar foot, the plantar fascia may be palpated. Nodules associated with plantar fascial fibromatosis may be palpated here. Plantar fasciitis is also diagnosed when pain is associated with palpation of the insertion of the plantar fascia on the medial heel. Other common pathologies on the plantar foot are ulcerations associated with diabetic neuropathy and other neuropathic conditions.
     
    This model was created from the file STS_023.

    10 downloads

       (0 reviews)

    0 comments

    Updated

  10. Free

    Left knee - Skin model STL file from converted CT scan

    The knee joint is formed by three bones: the femur, the tibia and the patella. the knee joint is the largest synovial joint and provides the flexion and extension movements of the leg as well as relative medial and lateral rotations while in relative flexion.

    The knee joint articulations are two condylar joints between the femur and the tibia as well as a joint between the patella and the femur. Although the fibula is closely related to the knee joint but it doesn't share in articulation.   The knee joint is also formed by some ligaments and cartilage called (menisci) which are best imaged by MRI.   This 3D model was created from the file STS_051   The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    10 downloads

       (0 reviews)

    0 comments

    Updated

  11. Free

    Normal Right Foot and Ankle Skin Model 3D Printable STL File Converted from CT Scan

    This is the normal right foot and ankle skin model of a 56-year-old male with right anterior thigh pleomorphic leiomyosarcoma. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Topographical landmarks of the foot and ankle consist of muscular, tendinous, and bony structures. Proximally, the superficial muscles of the anterior (tibialis anterior), lateral (peroneals) and posterior (gastrocnemius) compartments may be palpated. Anteriorly, the tibialis anterior tendon crosses the ankle joint and is used as a landmark for ankle joint injections and aspirations, where the practitioner will place the needle just lateral to the tendon. Posteriorly, the gastrocnemius and soleus converge to form the Achilles tendon. Ruptures of the tendon, as well as tendinous changes due to Achilles tendinopathy, may be palpated. At the level of the ankle joint, the joint line, medial malleolus (distal tibia) and lateral malleolus (distal fibula) may be palpated. The extensor hallucis longus and extensor digitorum longus tendons are visible on the surface of the dorsal foot. The extensor digitorum brevis muscle belly is seen on the dorsum of the lateral foot. On the plantar foot, the plantar fascia may be palpated. Nodules associated with plantar fascial fibromatosis may be palpated here. Plantar fasciitis is also diagnosed when pain is associated with palpation of the insertion of the plantar fascia on the medial heel. Other common pathologies on the plantar foot are ulcerations associated with diabetic neuropathy and other neuropathic conditions.
     
    This model was created from the file STS_014.

    9 downloads

       (0 reviews)

    0 comments

    Updated

  12. Free

    Right Knee Skin Model 3D Printable STL File Converted from CT Scan

    This model is the right knee skin rendering of a 65-year-old male with left thigh myxoid fibrosarcoma. At the time of diagnosis, the patient had metastases to his lungs. The patient therefore underwent neoadjuvant radiotherapy, surgery, and adjuvant chemotherapy and was found to have an intermediate grade lesion at the time of diagnosis. The patient is still living with the metastatic disease at 2.5 years since diagnosis. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Landmarks of the lower extremity consist of bony and muscular landmarks. Prior to incision, the bone landmarks should be palpated and drawn. The patella is the largest sesamoid bone (bone located within a tendon) and is located on the anterior aspect of the knee.  Along with the femur, it forms the patellofemoral joint, providing a mechanical advantage to leg extension. The quadriceps tendon inserts proximally and the patellar tendon inserts distally.  The patellar tendon attaches to the tibial tubercle on the anterior aspect of the tibia. On the anteromedial surface of the tibia is Gerdy's tubercle, where the sartorius, gracilis, and semitendinosus attach. Laterally, the head of the fibula may be palpated, which is the attachment for the posterolateral corner structures of the knee joint. The peroneal nerve wraps around the fibular neck, and a tinel’s sign may be elicited due to its superficial position at this location.
     
    The knee joint can be palpated and must be accurately located in order to provide landmarks for surgeries such as arthroscopy and arthroplasty. Typically, pain with palpation of the joint line is indicative of knee pathologies such as osteoarthritis or a meniscal tear, with point tenderness at the area of the tear. Proper landmarks are essential for the success of procedures about the knee, and therefore the skin should be adequately evaluated prior to any procedure.
     
    This model was created from the file STS_022.

    9 downloads

       (0 reviews)

    0 comments

    Updated

  13. Free

    Right Leg Skin Model 3D Printable STL File Converted from CT Scan

    This model is the right leg skin rendering of a 65-year-old male with left thigh myxoid fibrosarcoma. At the time of diagnosis, the patient had metastases to his lungs. The patient therefore underwent neoadjuvant radiotherapy, surgery, and adjuvant chemotherapy and was found to have an intermediate grade lesion at the time of diagnosis. The patient is still living with the metastatic disease at 2.5 years since diagnosis. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Landmarks of the lower extremity consist of bony and muscular landmarks.  Proximally, the extensor mechanism consists of the quadriceps tendon, patella, and the tibial tuberosity, which is located on the anterior proximal tibia, where the patellar tendon attaches.  On the anteromedial surface of the tibia is Gerdy's tubercle, where the sartorius, gracilis, and semitendinosus attach. Laterally, the head of the fibula may be palpated, which is the attachment for the posterolateral corner structures of the knee joint. The peroneal nerve wraps around the fibular neck, and a tinel’s sign may be elicited due to its superficial position at this location.
     
    Distally, the anterior ankle joint may be palpated. Pain with palpation may be indicative of osteoarthritis if general or an osteochondral defect if localized. The medial and lateral malleoli are located on either side of the tibiotalar joint, respectively and are the site of common ankle fractures. Posteriorly, the Achilles tendon inserts on the calcaneus.  A defect along this tendon may be a sign of a tendon rupture. The superficial peroneal nerve can possibly be isolated on the lateral aspect of the dorsal foot with full plantarflexion of the fourth ray.
     
    Topographical landmarks of the foot and ankle consist of muscular, tendinous, and bony structures. Proximally, the superficial muscles of the anterior (tibialis anterior), lateral (peroneals) and posterior (gastrocnemius) compartments may be palpated. Anteriorly, the tibialis anterior tendon crosses the ankle joint and is used as a landmark for ankle joint injections and aspirations, where the practitioner will place the needle just lateral to the tendon. Posteriorly, the gastrocnemius and soleus converge to form the Achilles tendon. Ruptures of the tendon as well as tendinous changes due to Achilles tendinopathy may be palpated. At the level of the ankle joint, the joint line, medial malleolus (distal tibia) and lateral malleolus (distal fibula) may be palpated. The extensor hallucis longus and extensor digitorum longus tendons are visible at the surface of the dorsal foot. The extensor digitorum brevis muscle belly is seen on the dorsum of the lateral foot. On the plantar foot, the plantar fascia may be palpated. Nodules associated with plantar fascial fibromatosis may be palpated here. Plantar fasciitis is also diagnosed when pain is associated with palpation of the insertion of the plantar fascia on the medial heel. Other common pathologies on the plantar foot are ulcerations associated with diabetic neuropathy and other neuropathic conditions.
     
    This model was created from the file STS_022.

    9 downloads

       (0 reviews)

    0 comments

    Updated

  14. Free

    Normal Right Foot and Ankle Skin Model 3D Printable STL File Converted from CT Scan

    This model is the right foot and ankle skin rendering of a 65-year-old male with left thigh myxoid fibrosarcoma. At the time of diagnosis, the patient had metastases to his lungs. The patient therefore underwent neoadjuvant radiotherapy, surgery, and adjuvant chemotherapy and was found to have an intermediate grade lesion at the time of diagnosis. The patient unfortunately died 9.5 months after diagnosis. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Topographical landmarks of the foot and ankle consist of muscular, tendinous, and bony structures. Proximally, the superficial muscles of the anterior (tibialis anterior), lateral (peroneals) and posterior (gastrocnemius) compartments may be palpated. Anteriorly, the tibialis anterior tendon crosses the ankle joint and is used as a landmark for ankle joint injections and aspirations, where the practitioner will place the needle just lateral to the tendon. Posteriorly, the gastrocnemius and soleus converge to form the Achilles tendon. Ruptures of the tendon as well as tendinous changes due to Achilles tendinopathy may be palpated. At the level of the ankle joint, the joint line, medial malleolus (distal tibia) and lateral malleolus (distal fibula) may be palpated. The extensor hallucis longus and extensor digitorum longus tendons are visible at the surface of the dorsal foot. The extensor digitorum brevis muscle belly is seen on the dorsum of the lateral foot. On the plantar foot, the plantar fascia may be palpated. Nodules associated with plantar fascial fibromatosis may be palpated here. Plantar fasciitis is also diagnosed when pain is associated with palpation of the insertion of the plantar fascia on the medial heel. Other common pathologies on the plantar foot are ulcerations associated with diabetic neuropathy and other neuropathic conditions.
     
    This model was created from the file STS_023.

    9 downloads

       (0 reviews)

    0 comments

    Updated

  15. Free

    Test_Head - stl file processed

    Test_Head - stl file processed

    Have embodi3D 3D print this model for you. Learn More. This file was created with democratiz3D. Automatically create 3D printable models from CT scans. Learn more.
     
    brachycephaly, skin, head, face, orbit, eye, nose, lips, 3d, model, .stl, printable, ear, children, cervical, spine, temporal, parietal, occipital, 

    8 downloads

       (0 reviews)

    0 comments

    Updated

  16. Free

    Right foot - Skin model STL file from converted CT scan

    The foot is a highly developed, biomechanically complex structure that serves to bear the weight of the body.   The foot can be divided into 3 parts: the hindfoot, the midfoot, and the forefoot. The hindfoot is composed of 2 of the 7 tarsal bones, the talus, and the calcaneus; the midfoot contains the rest of the tarsal bones; and the forefoot contains the metatarsals and the phalanges.   This 3D model was created from the file STS_039   The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    8 downloads

       (0 reviews)

    0 comments

    Updated

  17. Free

    Nasopharynx Model (Skin) - stl file processed

    Nasopharynx Model (Skin) - stl file processed

    This file was created with democratiz3D. Automatically create 3D printable models from CT scans. Learn more.
     
    3D, model, .stl, skin, .stl, orbit, eye, nose, lips, head, skull, neck, temporal, frontal, parietal, maxilla, mandible, 3d, model, skin, ear, external auditory conduct,

    8 downloads

       (0 reviews)

    0 comments

    Updated

  18. Free

    Mr brain tumor - stl file processed

    Mr brain tumor - stl file processed, head, skull,  skin, 3d model, stl, printable, tumor, brain, frontal, temporal, parietal, occipital, orbit, eye, ear, nose, face, skin

    8 downloads

       (0 reviews)

    0 comments

    Updated

  19. Free

    Pelvis and Hip - Skin model STL file from converted CT scan

    The bony pelvis is formed by 4 bones; a pair of hip bones, the sacrum and the coccyx. The bony pelvis supports the pelvic viscera and works to transmit force from the axial skeleton to the lower limbs.

    The two hip bones are related anteriorly by the symphysis pubis and posteriorly to the sacroiliac joints bilaterally.   The hip joint is a large synovial socket and ball joint which is formed by the femoral head (the ball) and the acetabulum (the socket). The acetabulum is formed by pelvic bones; the ilium, the ischium and the pubis.   The hip joint represents the articulation between the lower extremity and the axial skeleton and allows a high degree of mobility while being stable.   This 3D model was created from the file STS_040   The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    8 downloads

       (0 reviews)

    0 comments

    Updated

  20. Free

    ultra pet ct - bone model - stl file processed

    ultra pet ct - bone model - stl file processed

    Have embodi3D 3D print this model for you. This file was created with democratiz3D. Automatically create 3D printable models from CT scans.
     
    whole, body, .stl, printable, head, face, mandible, maxilla, frontal, temporal, neck, dorsal, spine, abdomen, thorax, chest, gluteus, lower, limb, knee, ankle, 

    8 downloads

       (0 reviews)

    0 comments

    Updated

  21. Free

    BRAIN TUMOR - stl file processed

    BRAIN TUMOR - stl file processed

    7 downloads

       (0 reviews)

    0 comments

    Updated

  22. Free

    OSEO ROSTRO MIA - stl file processed

    OSEO ROSTRO MIA - stl file processed
    baby face, skin, stl, lips, eye, ear, 3dmodel

    7 downloads

       (0 reviews)

    0 comments

    Updated

  23. Free

    Whole Body - Skin model STL file from converted CT scan

    Whole body: chest, abdomen and pelvis
     
    The chest wall (thoracic cage) is composed by twelve pairs of ribs laterally and the sternum anteriorly. The ribs are attached to the dorsal vertebrae (thoracic spine) posteriorly and along their costal cartilage to the sternum.
    The thoracic cage main function is to protect the vital chest organs such as the heart and lungs.

    The cervical spine is the upper most spines forming the spinal column, extending from the skull base to the level of the thoracic vertebra (the spines with attached ribs). The cervical spines are usually seven and the main function is to support the skull and to protect the spinal cord.
     
    The dorsal (thoracic) spine forms the middle portion of the vertebral column extending below the seventh cervical vertebra to above the first lumbar vertebra. The dorsal spine is formed by twelve vertebral bodies.
    The vertebrae forming the dorsal spine are unique in shape as they are the only vertebral bodies articulating with ribs.
     
    The lumbar spine represents the mid-lower segment of the vertebral column and is composed of five adjacent vertebrae. They are convex anteriorly to form a lumbar lordosis. The lumbar spine facet joints allows limited movements and rotation.
     
    The bony pelvis is formed by 4 bones; a pair of hip bones, the sacrum and the coccyx. The bony pelvis supports the pelvic viscera and works to transmit force from the axial skeleton to the lower limbs.
    The two hip bones are related anteriorly by the symphysis pubis and posteriorly to the sacroiliac joints bilaterally.
     
    This 3D model was created from the file STS_040
     
    The original CT examination can be reviewed at: The 3D bone model created from this scan can be reviewed at: The 3D muscle model created from this scan can be reviewed at: 

    7 downloads

       (0 reviews)

    0 comments

    Updated

  24. Free

    Left Leg Skin Model 3D Printable STL File Converted from CT Scan

    This is the normal left leg skin model (including foot) of a 56 year old male with right anterior thigh pleomorphic leiomyosarcoma. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    Landmarks of the lower extremity consist of bony and muscular landmarks.  Proximally, the extensor mechanism consists of the quadriceps tendon, patella, and the tibial tuberosity, which is located on the anterior proximal tibia, where the patellar tendon attaches.  On the anteromedial surface of the tibia is Gerdy's tubercle, where the sartorius, gracilis, and semitendinosus attach. Laterally, the head of the fibula may be palpated, which is the attachment for the posterolateral corner structures of the knee joint. The peroneal nerve wraps around the fibular neck, and a tinel’s sign may be elicited due to its superficial position at this location.
     
    Distally, the anterior ankle joint may be palpated. Pain with palpation may be indicative of osteoarthritis if general or an osteochondral defect if localized. The medial and lateral malleoli are located on either side of the tibiotalar joint, respectively and are the site of common ankle fractures. Posteriorly, the Achilles tendon inserts on the calcaneus.  A defect along this tendon may be a sign of a tendon rupture. The superficial peroneal nerve can possibly be isolated on the lateral aspect of the dorsal foot with full plantarflexion of the fourth ray.
     
    This model was created from the file STS_014.

    6 downloads

       (0 reviews)

    0 comments

    Updated

  25. Free

    Right Thigh Skin Model 3D Printable STL File Converted from CT Scan

    This model is the right thigh skin rendering of a 65-year-old male with left thigh myxoid fibrosarcoma. At the time of diagnosis, the patient had metastases to his lungs. The patient therefore underwent neoadjuvant radiotherapy, surgery, and adjuvant chemotherapy and was found to have an intermediate grade lesion at the time of diagnosis. The patient is still living with the metastatic disease at 2.5 years since diagnosis. This is an STL file created from DICOM images of his CT scan which may be used for 3D printing.
     
    The thigh is divided into three compartments: the anterior, posterior, and adductor. After a femoral fracture or vascular injury in the thigh, increasing pressure within a compartment may threaten to compromise blood flow to muscles within the compartment, a syndrome known as “compartment syndrome.” Compartment syndrome is diagnosed clinically as “pain out of proportion to exam.” In patients that a clinical exam may not be obtained, such as those who are intubated or with a traumatic brain injury, a Stryker needle of each compartment may be performed.  The diagnosis of compartment syndrome is defined as pressures within 30 mmHg of diastolic blood pressure. Compartment syndrome is an emergency and thigh fasciotomies must be performed immediately to prevent compromise of muscles within the compartment at risk.
     
    Thigh fasciotomies may be performed through a single incision for release of the anterior and posterior compartments, or a medial incision for decompression of the adductor compartment (less common). For the single incision technique, the incision is created laterally, and the fascia lata is incised. This exposes the anterior compartment, which is decompressed. The lateral intermuscular septum is then incised to decompress the posterior compartment.
     
    This model was created from the file STS_022.

    6 downloads

       (0 reviews)

    0 comments

    Updated

Sign in to follow this  

×
×
  • Create New...