-
Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable medical models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.
Extremity, Upper (Arm)
Upper extremity: shoulder, arm, forearm, hand
184 files
-
Free
Right shoulder - glenohumeral joint
By Dr. Mike
This 3D printable STL file contains a model of the right glenohumeral joint was derived from a medical CT scan.
This model was created using the democratiz3D 3D model creation service
0522c0883
15 downloads
(1 review)0 comments
Updated
-
Free
Hand CT scan - stl file processed
By Diogo Casal
Hand CT scan - stl file processed
This file was created with democratiz3D. Automatically create 3D printable models from CT scans. Learn more.
distal phalanx, Distal interphalangeal joint, Proximal interphalangeal joint, Middle phalanx, Head of the proximal phalanx, Proximal phalanx, Metacarpophalangeal joint, Base of the proximal phalanx, Metacarpal head, Sesamoid, Metacarpal, Metacarpal base, Capitate, Trapezoid, Hamate, Trapezium, Triquetrum, Scaphoid, Pisiform, Radial styloid, Ulnar styloid, Lunate, Distal radius, Distal radioulnar joint, Distal ulna, bone, 3d, model, stl, printable
46 downloads
- distal phalanx
- bone
- (and 30 more)
(1 review)0 comments
Updated
-
Free
Scapula
This anatomically accurate scapula was derived from a model by Bror (http://www.thingiverse.com/thing:34004). The only change was to split the model into two pieces for easier printing.
The model may be useful for medical education and shows the scapular surfaces, acromion and corocoid process. The file is in STL format and compressed with ZIP.
Thank you to Dr Mike for the excellent renders.
Printed on a Makerbot Replicator 1.
Find us at www.healthphysics.com.au
45 downloads
(1 review)0 comments
Updated
-
Free
HLF - stl file processed
By Dr Javier R
HLF - stl file processed
Have embodi3D 3D print this model for you. This file was created with democratiz3D. Automatically create 3D printable models from CT scans.
3d, model, .stl, printable, Distal interphalangeal joint, Proximal interphalangeal joint, Middle phalanx, Head of the proximal phalanx, Proximal phalanx, Metacarpophalangeal joint, Base of the proximal phalanx, Metacarpal head, Sesamoid, Metacarpal, Metacarpal base, Capitate, Trapezoid, Hamate, Trapezium, Triquetrum, Scaphoid, Pisiform, Radial styloid, Ulnar styloid, Lunate, Distal radius, Distal radioulnar joint
Distal ulna, 3d, model, .stl, upper, limb, hand, wrist, upper, limb, bone
1 download
(0 reviews)0 comments
Updated
-
Free
Left shoulder - scapula, glenoid
By Dr. Mike
This 3D printable STL file contains a model of the left scapula was derived from a medical CT scan and shows the glenoid fossa
This model was created using the democratiz3D 3D model creation service
0522c0883
14 downloads
(0 reviews)0 comments
Updated
-
Free
left forearm
By rpapandrea
not repaired?
radius, ulna, stl, forearm, 3dmodel, bone, 3dmodel, ulna, radius,
16 downloads
(0 reviews)0 comments
Updated
-
Free
CAP, shoulder, ribs STS007 - processed
By Dr. Mike
This 3D printable STL file contains a model of the bones of the shoulder of a 60 year old woman was derived from a real medical CT scan. The model includes the clavicle, scapula, proximal humerus, and ribs.
This model was created using the democratiz3D free online 3D model creation service.
STS007
7 downloads
(0 reviews)0 comments
Updated
-
Free
hand bone - stl file processed
By woojonc
hand bone - stl file processed, hand, stl, wrist, stl, bone, 3dmodel, print, upper, limb
158 downloads
-
Free
Left Scapula and Humerus
By embodi3d
This shoulder and humerus was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the left scapula, humerus, proximal radius and ulna bones, and the shoulder and elbow joints. The humerus has been joined to the scapula at the glenohumeral joint to form one solid piece.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 125370
169 downloads
- 3D printing
- shoulder
- (and 4 more)
-
Free
Shoulder joint
By embodi3d
This shoulder joint was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the scapula, proximal humerus, the glenoid fossa, and detail anatomy of the glenohumeral (shoulder) joint. There are full size and double size files available. The enlarged double size file shows anatomy in terrific detail.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 316648
90 downloads
- 3D printable shoulder
- shoulder
- (and 5 more)
(0 reviews)0 comments
Submitted
-
Free
Elbow joint
By embodi3d
This elbow joint was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the distal humerus, the olecranon as it sits in the olecranon fossa, the two humeral epicondyles, and the distal radius and radial head. There are full size and double size files available. The enlarged double size file shows anatomy in terrific detail.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 57476
74 downloads
- 3d printable elbow
- elbow
- (and 4 more)
(0 reviews)0 comments
Updated
-
Free
Distal clavicle fracture
By embodi3d
This 3D printable STL file of a fracture of the distal clavicle was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the comminuted distal fracture. Download is free for registered members.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 272052
25 downloads
(0 reviews)0 comments
Submitted
-
Free
3D printable wrist
By embodi3d
This 3D printable STL file of the wrist was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the individual wrist bones in detail. Download is free for registered members.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 143418
75 downloads
- wrist
- 3D printable
- (and 2 more)
(0 reviews)0 comments
Submitted
-
Free
Healed clavicle fracture, 3D printable model
By embodi3d
This 3D printable STL file of a healed clavicle (collarbone) fracture was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the healed fracture and residual deformity clearly. Download is free for registered members.
This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
Technical specs:
File format: STL
Manifold mesh: Yes
Minimum wall thickness: 1 mm
Triangles: 287940
31 downloads
(0 reviews)0 comments
Submitted
-
Free
(0 reviews)0 comments
Updated
-
Free
(0 reviews)0 comments
Updated
-
Free
(0 reviews)0 comments
Updated
-
Free
(0 reviews)0 comments
Updated
-
Free
Right forearm, wrist, and hand, a 3D printable medical file of their normal anatomy converted from a CT scan DICOM dataset of a 48-year old female
By embodi3d
The radius and the ulna are long, slightly curved bones that lie parallel from the elbow, where they articulate with the humerus, to the wrist, where they articulate with the carpals. The radius is located laterally, near the thumb, and the ulna medially, near the little finger. The radius and the ulna have a styloid process at the distal end; they are also attachment sites for many muscles.The radius is smaller than the ulna.
A total of 27 bones constitute the basic skeleton of the wrist and hand. These are grouped into carpals, metacarpals, and phalanges.
The wrist is the most complex joint in the body. It is formed by 8 carpal bones grouped in 2 rows with very restricted motion between them. From radial to ulnar, the proximal row consists of the scaphoid, lunate, triquetrum, and pisiform bones. In the same direction, the distal row consists of the trapezium, trapezoid, capitate, and hamate bones.
The hand contains 5 metacarpal bones. Each metacarpal is characterized as having a base, a shaft, a neck, and a head. The first metacarpal bone (thumb) is the shortest and most mobile. It articulates proximally with the trapezium. The other 4 metacarpals articulate with the trapezoid, capitate, and hamate at the base. Each metacarpal head articulates distally with the proximal phalanges of each digit.
The hand contains 14 phalanges. Each digit contains 3 phalanges (proximal, middle, and distal), except for the thumb, which only has 2 phalanges. To avoid confusion, each digit is referred to by its name (thumb, index, long, ring, and small) rather than by number.
This is 3D printable medical file converted from a CT scan DICOM dataset of a 48-year old female.
66 downloads
- stl file
- 3d medical printing
- (and 6 more)
(0 reviews)0 comments
Updated
-
Free
Right shoulder bones
By Dr. Mike
This 3D printable STL file contains a model of the right shoulder was derived from a real medical CT scan.
This model was created using the democratiz3D free online 3D model creation service.
QIN-HN-01-0003
20 downloads
(0 reviews)0 comments
Updated
-
Free
Left shoulder bones
By Dr. Mike
This 3D printable STL file contains a model of the bones of the left shoulder was derived from a real medical CT scan.
This model was created using the democratiz3D free online 3D model creation service.
QIN-HN-01-0003
20 downloads
(0 reviews)0 comments
Updated
-
Free
Mikes Hand
By mikefazz
This is a subvolume from an abdomen CT scan from a 32 year old male. I happened to have my hand in the field of view (probably since I had just re-injured my shoulder from a skiing fall).
Voxel Size:
0.835mm in plane
1.6mm out of plane
35 downloads
(0 reviews)0 comments
Updated
-
$15.00
Mikes Hand Segmented
By mikefazz
Here is my right hand segmented and smoothed. All bones are included separately as well as combined together. The Radius, Ulna, and Soft Tissue have also been cut to make printing easier. The combined bones stl is with the arm bones cut. Segmentation of wrist bones wasn't ideal due to the somewhat low resolution of the scan... smoothing may be a bit excessive there to account for this. Refer to the shared scan volume to see the original data.
1 purchase 2 downloads
(0 reviews)0 comments
Updated
-
Free
Distal radius - stl file processed
By Jshaw85
Distal radius - stl file processed, radius, cubitus, arm, stl, 3dmodel, print, bone, muscle
6 downloads
(0 reviews)0 comments
Updated
-
Free
The humero-scapular articulation , a 3D printable model of its normal anatomy converted from a CT scan DICOM dataset
By embodi3d
The shoulder joint is the most flexible joint in the human body, it is formed of two compartments, the gelnohumoral joint and the acromioclavicular joint. This is a 3D printable model converted from a CT scan DICOM dataset (STS-015) of a 34-year old female showing the normal relation between the humerus and the scapula. The humeral head lies in the cup-like fossa in the scapula that is the glenoid fossa, it's also attached to the coracoid process by the coraco-humeral ligament.
10 downloads
(0 reviews)0 comments
Updated
-
File Reviews
-
-
-
-
-
By Andrew Forsberg · PostedNice file. What is the scaling factor to create a accurately sized adult heart?
-
-
File Comments
-
The cartilages of the larynx are one of my summer vacation projects. The raw data is from a CT scan and the nasopharynx can't be segmented properly. Eventually, I can segment the soft tissues as a bulk and the cavities as a separated mesh. -
Would this model cover from the nasopharynx to the larynx? Thank you -
By mbbrewerca · Posted
Great scan. I plan on printing it soon for my wife, who was born with this defect. The only things I had to do in preparation for the print was to clean up some artifacts (small parts floating in mid-air), and lay the print flat on the print bed. I might end up rethinking the last part after I see what the supports and base look like. Looking forward to it! My one question is, what is the scale for the heart? Are we looking at a 1:1 scale, or has it been enlarged for study? -
By arcadia-ncdl · Posted
Dr. Mike, I work at a neurocognitive lab at the University of Maryland and have some questions about how you were able to make this STL file hollow in order to save on 3D printer material. I'd like to discuss. Please email aewell1@umd.edu -
hi dr what software you use to create web-like texture ?????? that may very help full if you tell me .
-
-
Recent Forum Posts
-
By smithnovel · Posted
It's amazing to see that i had the same problem and question. I usually avoid the Contact Z distance. Anyways, I got information from several places regarding any problem in 3d printing. -
First of all, a lot of people in the "professional world" are using Ultimakers. And the Palette 2 is still not working with 2.85 filaments (and probably never will?) The last few months I came across a new scenario for multi material printing. It is mixing PLA with PETG for supports. PLA and PETG don't bond to each other. So you can print your part with PLA and supports with PETG (or vice versa) and set the contact z distance to 0(!). It works very well. Supports are coming off easy and the interface layers look as good as if you were using soluble supports. Since you have to keep soluble filament in dry conditions it is much easier (and cheaper) to use PETG instead. Setting up the Palette is very easy. Mosaic has some videos one can watch like this one https://www.youtube.com/watch?v=uqbMw_M07GM (and the two follow up ones). As for my experience. The combination Prusa MK3 + Palette 2 is probably one of the most used one in the community and works very reliable (of course there is no 100% guarantee but lets say 98,5% of the time 😉) . And I always use and recommend Prusas. Also I would recommend using this post processing tool for PrusaSlicer 2.0: https://github.com/tomvandeneede/p2pp for an Prusa+Palette combination. I would also still strongly recommend the already mentioned DIY canvas hub guide. There is already an Octoprint beta version out for the new Raspberry 4 so chances are the guide might work with the new Raspberry 4. But I haven't tested it. -
-
Flaviu, Can you go into more detail with your Palette 2 experience? The concept looked great in theory when it came out, but at the time I heard it was still problematic. Are you finding success now? -
If you are only interested in bone, the lower dose is probably fine. Make sure you get sequences with soft tissue reconstruction algorithm in addition to the standard bone algorithm. Edge enhancement with the bone algorithm causes speckling, which can make bone segmentation more difficult. See my blog article on selecting a good scan for 3D printing below for details. Look at the section on reconstruction kernel.
-
