Jump to content
  • Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable medical models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.

Spine and Pelvis

Sign in to follow this  

Files related to 3D printing spine models.

508 files

  1. Free

    C1 & C2 with articulation

    C1 and C2 vertebrae with an articulation piece to be printed in elastic material

    42 downloads

       (0 reviews)

    0 comments

    Submitted

  2. Free

    Parla Pelvis - processed

    Parla Pelvis - processed

    12 downloads

       (0 reviews)

    0 comments

    Submitted

  3. Free

    L5 lumbar compression fracture

    This 3D printable STL file contains a model of the lumbar spine was derived from a medical CT scan. It shows a compression fracture at L5.
    This model was created using the democratiz3D 3D model creation service
    0522c0878 L5fx

    10 downloads

       (0 reviews)

    0 comments

    Updated

  4. Free

    CT Spine - processed

    CT Spine - processed

    17 downloads

       (0 reviews)

    0 comments

    Submitted

  5. Free

    CT SCAN CHEST-ABDOMEN-PELVIS 11-27-16 - processed

    CT SCAN CHEST-ABDOMEN-PELVIS 11-27-16 - processed

    3 downloads

       (0 reviews)

    0 comments

    Submitted

  6. Free

    CT SCAN - CHEST-PELVIC - 10-27-16 - processed

    CT SCAN - CHEST-PELVIC - 10-27-16 - processed

    3 downloads

       (0 reviews)

    0 comments

    Submitted

  7. Free

    Two lumbar vertebrae

    This is an STL file of two lumbar vertebrae from a CT scan. The STL file is raw and has not been edited to remove extraneous geometry. Since the CT scan it was taken from had IV contrast, the lumbar arteries are visualized and can be seen wrapping around the vertebral bodies.

    35 downloads

       (0 reviews)

    0 comments

    Updated

  8. Free

    Detailed STL model of the thoracic and lumbar spine

    This 3D printable STL file contains a model of the thoracic and lumbar spine was derived from a real medical CT scan of a 60 year old woman. It shows the spinal anatomy in great detail.
    This model was created using the democratiz3D free online 3D model creation service.
    STS007

    42 downloads

       (0 reviews)

    0 comments

    Updated

  9. Free

    L3 vertebra from CT scan

    This anatomically accurate L3 vertebra was extracted from a DICOM CT dataset (0.5 mm slice thickness x 95 slices).
     
    The model may be useful for medical education and shows shows the vertebral body, spinous process, facets, transverse processes and spinal canal. The file is in STL format and compressed with ZIP.
     
    Printed on a Makerbot Replicator 1.
     
    Thank you to Dr Mike for the excellent renders.
     
    Find us at www.healthphysics.com.au

    299 downloads

       (2 reviews)

    0 comments

    Updated

  10. Free

    test niro 1 - processed

    test niro 1 - processed

    6 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Free

    Ischium from CT scan

    This anatomically accurate ischium was extracted from a CT DICOM dataset (1 mm slice thickness x 38 slices).
    The model may be useful for medical education and shows shows the ischial tuberosity. The file is in STL format and compressed with ZIP.
    Thank you to Dr Mike for the excellent renders.
    Find us at www.healthphysics.com.au

    12 downloads

       (0 reviews)

    0 comments

    Updated

  12. Free

    Cervical spine, 3D printable

    This STL file of the cervical spine was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the skull base, part of the mandible, and cervical and upper thoracic vertebrae. Download is free for registered members.
     
    This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
     
    The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
     
    Technical specs:
    File format: STL
    Manifold mesh: Yes
    Minimum wall thickness: 1 mm
    Triangles: 451422

    69 downloads

       (1 review)

    1 comment

    Updated

  13. Free

    Thoracic spine with scoliosis

    This 3D printable STL file of a thoracic spine with severe scoliosis was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows how the vertebrae become misaligned in the scoliotic spine. Great for education at all levels. Download is free for registered members. This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
     
    The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
     
    Technical specs:
    File format: STL
    Manifold mesh: Yes
     
    Triangles: 261682

    47 downloads

       (0 reviews)

    0 comments

    Updated

  14. Free

    Thoracic spine 1

    This 3D printable STL file of the thoracic spine was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows detailed anatomy of the thoracic spine, including the relationship with the ribs. Download is free for registered members.
     
    This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
     
    The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
     
    Technical specs:
    File format: STL
    Manifold mesh: Yes
    Triangles: 220104

    85 downloads

       (0 reviews)

    0 comments

    Updated

  15. Free

    Whole body and L spine for tutorial NRRDs - processed

    3D Model of Lumbar spine. Anterior, Lateral, Oblique, axial and posterior views for tutorial NRRDs - processed

    3 downloads

       (0 reviews)

    0 comments

    Updated

  16. Free

    Cervical spine

    This 3D printable STL file of the cervical spine was generated from real CT scan data and is thus anatomically accurate as it comes from a real person. It shows the relationship between the skull base and the C1 and C2 vertebrae, as well as the alignment and position of the cervical vertebrae. Perfect for education. Download is free for registered members. This file was originally created by Dr. Bruno Gobbato, who has graciously given permission to share it here on Embodi3D. Modifications were made by Dr. Mike to make it suitable for 3D printing.
    The file(s) are distributed under the Creative Commons Attribution-NonCommercial-ShareAlike license. It can't be used for commercial purposes. If you would like to use it for commercial purposes, please contact the authors.
    Technical specs:
    File format: STL
    Manifold mesh: Yes
    Triangles: 352794

    184 downloads

       (2 reviews)

    0 comments

    Updated

  17. Free

    Lordosis of the cervical spine

    This 3D printable STL file contains a model of the cervical spine and skull base was derived from a medical CT scan.The 62 year old male patient had laryngeal cancer. Notable cervical spine lordosis is present.
    This model was created using the democratiz3D 3D model creation service
     
    TCGA-UF-A718

    8 downloads

       (0 reviews)

    0 comments

    Updated

  18. Free

    Shannon Li - processed

    Shannon Li - processed

    1 download

       (0 reviews)

    0 comments

    Submitted

  19. Free

    Cervical spine with mild lordosis

    This 3D printable STL file contains a model of the cervical spine was derived from a medical CT scan.
    This model was created using the democratiz3D 3D model creation service
     
    0522c0909

    17 downloads

       (0 reviews)

    0 comments

    Updated

  20. Free

    Thoracic spine

    This 3D printable STL file contains a model of the thoracic spine was derived from a real medical CT scan.
    This model was created using the democratiz3D free online 3D model creation service.
     
    QIN-HN-01-0003

    19 downloads

       (0 reviews)

    0 comments

    Updated

  21. Free

    Cervical spine

    This 3D printable STL file contains a model of the cervical spine was derived from a real medical CT scan.
    This model was created using the democratiz3D free online 3D model creation service.
     
    QIN-HN-01-0003

    11 downloads

       (0 reviews)

    0 comments

    Updated

  22. Free

    Pelvis bones

    This 3D printable STL file contains a model of the bones of the pelvis and sacrum was derived from a real medical CT scan.
    This model was created using the embodi3D free online 3D model creation service.

    34 downloads

       (0 reviews)

    0 comments

    Updated

  23. Free

    IRM MED TUN - stl file processed

    IRM MED TUN - stl file processed

    Have embodi3D 3D print this model for you. This file was created with democratiz3D. Automatically create 3D printable models from CT scans.
     
    scoliosis, bone, 3d, model, .stl, printable, retroperotoneum, kidney, psoas, muscle, ribs, back, iliac, 

    1 download

       (0 reviews)

    0 comments

    Updated

  24. Free

    Lumbar spine

    This 3D printable STL file contains a model of the l;umbar spine was derived from a real medical CT scan.
    This model was created using the embodi3D free online 3D model creation service.
     
    QIN-HN-01-0003

    63 downloads

       (0 reviews)

    0 comments

    Updated

  25. Free

    Pelvis - Whitney's project - processed

    Pelvis - Whitney's project - processed

    5 downloads

       (0 reviews)

    0 comments

    Submitted

Sign in to follow this  
  • File Reviews

  • File Comments

  • Recent Forum Posts

    • Once I upload my CT scan to have an STL file and get the file I download it to my documents folder but can't find it.  I got an error message that said it couldn't be opened because it was .stl format.  Is it hidden somewhere? Dan    
    • You can check this tutorial https://www.embodi3d.com/democratiz3d-user-manual/#Quality
    • I wanted to know that, is there any size difference between the .stl file generated form CT scan and the actual size of the skull of the patient. at the conversion, is there any dimensional change could be happen in the software. 
    • It's amazing to see that i had the same problem and question. I usually avoid the Contact Z distance. Anyways, I got information from several places regarding any problem in 3d printing.
    • First of all, a lot of people in the "professional world" are using Ultimakers. And the Palette 2 is still not working with 2.85 filaments (and probably never will?)   The last few months I came across a new scenario for multi material printing. It is mixing PLA with PETG for supports. PLA and PETG don't bond to each other. So you can print your part with PLA and supports with PETG (or vice versa) and set the contact z distance to 0(!). It works very well. Supports are coming off easy and the interface layers look as good as if you were using soluble supports. Since you have to keep soluble filament in dry conditions it is much easier (and cheaper) to use PETG instead.    Setting up the Palette is very easy. Mosaic has some videos one can watch like this one https://www.youtube.com/watch?v=uqbMw_M07GM (and the two follow up ones).   As for my experience. The combination Prusa MK3 + Palette 2 is probably one of the most used one in the community and works very reliable (of course there is no 100% guarantee but lets say 98,5% of the time 😉) . And I always use and recommend Prusas.    Also I would recommend using this post processing tool for PrusaSlicer 2.0: https://github.com/tomvandeneede/p2pp for an Prusa+Palette combination.    I would also still strongly recommend the already mentioned DIY canvas hub guide. There is already an Octoprint beta version out for the new Raspberry 4 so chances are the guide might work with the new Raspberry 4. But I haven't tested it.
×
×
  • Create New...