Jump to content
  • Welcome to embodi3D Downloads! This is the largest and fastest growing library of 3D printable medical models generated from real medical scans on the Internet. A unique scientific resource, most of the material is free. Registered members can download, upload, and sell models. To convert your own medical scans to a 3D model, take a look at democratiz3D, our free and automated conversion service.

Spine and Pelvis

Sign in to follow this  

Files related to 3D printing spine models.

508 files

  1. $4.00

    cervical spine segmented

    Individually segmented vertebra for cervical spine, C1 through C7.  Cervical disks are available as a separate file.  Clear silicone sealant works well to assemble print.
     
    Anterior arch of the atlas,  Base of the skull,  Odontoid process,  Posterior arch of the atlas, Mandible, Spinous process,  Body of the axis,  Anterior superior margin of the vertebra,  Transverse process,  Anterior inferior margin of the vertebra,  Superior articular facet,  Inferior articular facet,  Superior vertebral end plate,  Inferior vertebral end plate,  Intervertebral facet joint,  Intervertebral disk space,  Lamina,  Articular pillar,  Spinous process

    13 purchases   69 downloads

       (1 review)

    0 comments

    Updated

  2. $3.00

    Vertebra bifida

    Columna vertebral , Superior vertebral end plate, Inferior vertebral end plate, Intervertebral foramen, Spinous process, Transverse process, Intervertebral disk space, Superior articular process, Inferior articular process, body, spinous, process, transverse, bifid, spine, 3d, model, .stl, printable, printing, embodi, ribs, 

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  3. $6.00

    Pelvis and sacrum

    Full size, segmented pelvis and sacrum, young adult female. 

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Submitted

  4. $2.00

    DISKS for Segmented lumbar spine

    .STL files for the intervertebral disks of the segmented lumbar spine L1/2 through l5/s1.  Lumbar spine and iliac bones are separate downloads

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Submitted

  5. $6.00

    lumbar spine and sacrum

    Segmented lumbar spine and sacrum, young adult.  This includes L1 through L5 vertebral bodies and the sacrum .STL files for the intervertebral disks and pelvis are available as a separate download.  

    2 purchases   12 downloads

       (0 reviews)

    0 comments

    Updated

  6. $1.00

    cervical disks for segmented cervical spine

    Intervertebral disks for segmented cervical spine 3D print

    6 purchases   127 downloads

       (0 reviews)

    0 comments

    Updated

  7. $15.00

    Pelvis and spine with osteophytes

    Female pelvis and spine with massive osteophytes. CT scan, 0,6mm slides. Sketchfab
     
    anatomy, spine, pelvis, osteophytes, disc hernia, spondiloartrhosis, disc, ribs, hip, head, femur, stl, 3d, model, printable

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  8. $4.99

    Female Pelvis

    This is a 3D printable STL model of the pelvis of a woman derived from a CT scan.
    STS_003. This model was created using the democratiz3D service.

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  9. $9.99

    Total spine, cervical, thoracic, and lumbar

    This is a 3D printable STL model of the entire spinal column, including cervical, thoracic, and lumbar regions derived from a CT scan.
    STS_003. This model was created using the democratiz3D service.

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  10. $2.99

    Thoracic spine with kyphosis (hunchback deformity)

    This 3D printable STL model of the thoracic spine shows notable kyphosis (hunchback deformity) and was derived from a CT scan.
    STS_002. This model was created using the democratiz3D service.

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  11. $1.00

    lumbar vertebrae

    This is a 3D model of lumbar vertebrae ready for print., spine, bone, stl, 3dmodel, print, column, 

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Updated

  12. Free

    UpperAbdomen5 - stl file processed

    UpperAbdomen5 - stl file processed
    bone, stl, 3dmodel, chest, ribs, stl,

    5 downloads

       (0 reviews)

    0 comments

    Updated

  13. Free

    UpperAbdomen5 - stl file processed

    UpperAbdomen5 - stl file processed
    3dmodel , stl, bone, pelvis, 3dmodel

    0 downloads

       (0 reviews)

    0 comments

    Updated

  14. $20.00

    Acetabular fracture of the pelvis

    Acetabular fracture of the pelvis. CT scan, 2mm slides. Pelvix set, Osirix dicom library.
    link to sketchfab: Acetabular fracture of the pelvis

    0 purchases   28 downloads

       (0 reviews)

    0 comments

    Updated

  15. $9.99

    Lumbar spine compression fracture with severe arthritis STL file

    This high quality STL file of the lumbar spine is confirmed 3D printable. It was taken from a patient with a chronic L2 lumbar spine compression fracture. The abnormal L2 vertebral body has caused severe degenerative change at the L2-3 level, with obliteration of the L2-3 intervertebral disk and severe osteophyte formation. The fracture and collapse of the L2-3 disk causes subluxation of the facet joints at this level, and narrowing of the L2 neural foramen. It is clearly illustrated how degenerative, arthritic change can result in nerve pinching at the neural foramen. This model can be used for scientific and medical education, and shows what compression fractures and degenerative spine disease look like. Also, the model is useful for teaching spinal interventions, such as lumbar punctures, epidural steroid injections, selective nerve root blocks, vertebroplasty, and kyphoplasty. 
     
    The file is in STL file format. 21.6 MB
    221181 vertices, 442558 polygons
    Confirmed printable on Formlabs Form 2 with white resin. 

    0 purchases   0 downloads

       (0 reviews)

    0 comments

    Submitted

Sign in to follow this  
  • File Reviews

  • File Comments

  • Recent Forum Posts

    • Once I upload my CT scan to have an STL file and get the file I download it to my documents folder but can't find it.  I got an error message that said it couldn't be opened because it was .stl format.  Is it hidden somewhere? Dan    
    • You can check this tutorial https://www.embodi3d.com/democratiz3d-user-manual/#Quality
    • I wanted to know that, is there any size difference between the .stl file generated form CT scan and the actual size of the skull of the patient. at the conversion, is there any dimensional change could be happen in the software. 
    • It's amazing to see that i had the same problem and question. I usually avoid the Contact Z distance. Anyways, I got information from several places regarding any problem in 3d printing.
    • First of all, a lot of people in the "professional world" are using Ultimakers. And the Palette 2 is still not working with 2.85 filaments (and probably never will?)   The last few months I came across a new scenario for multi material printing. It is mixing PLA with PETG for supports. PLA and PETG don't bond to each other. So you can print your part with PLA and supports with PETG (or vice versa) and set the contact z distance to 0(!). It works very well. Supports are coming off easy and the interface layers look as good as if you were using soluble supports. Since you have to keep soluble filament in dry conditions it is much easier (and cheaper) to use PETG instead.    Setting up the Palette is very easy. Mosaic has some videos one can watch like this one https://www.youtube.com/watch?v=uqbMw_M07GM (and the two follow up ones).   As for my experience. The combination Prusa MK3 + Palette 2 is probably one of the most used one in the community and works very reliable (of course there is no 100% guarantee but lets say 98,5% of the time 😉) . And I always use and recommend Prusas.    Also I would recommend using this post processing tool for PrusaSlicer 2.0: https://github.com/tomvandeneede/p2pp for an Prusa+Palette combination.    I would also still strongly recommend the already mentioned DIY canvas hub guide. There is already an Octoprint beta version out for the new Raspberry 4 so chances are the guide might work with the new Raspberry 4. But I haven't tested it.
×
×
  • Create New...