Jump to content
  • entries
    2
  • comments
    9
  • views
    8,408

3D Printing of Renal Mass from MRI Images


ebaumel

3,863 views

blog-0434872001454393194.jpg

Every 3D printing case is different, and must be tailored for the individual patient’s specific clinical condition, anatomy, and imaging techniques.

 

A 47 year old woman with a renal mass was being evaluated for surgical treatment planning. A urologist familiar with my current 3D printing work requested a 3D printed model of the kidney. The purpose was to help demonstrate the anatomy of the mass with respect to the renal hilum, to help determine if a partial nephrectomy was possible, or if a total nephrectomy was required.

 

 

The patient had a documented reaction to radiographic iodinated contrast, and therefore an MRI was performed instead of a CT scan. The scan was performed on a 1.5 T GE Signa Excite system. The data set from a coronal 3D gradient echo pulse sequence acquisition was chosen because it best visualized the tumor encroachment into the renal sinus.

 

 

 

Renal Mass MRI Coronal

 


The 3D model was created from segmentation of the kidney from the 3D gradient echo acquisition. The renal parenchyma was then made into the digital 3D model, leaving the mass as negative space. This was then printed to demonstrate the entire kidney. An additional 3D model was created showing a bisected view of the kidney along the coronal plane. This was done to see which model would be of more utility.

 

The patient’s DICOM image files from the MRI were processed using the Materialise Innovation Suite’s Mimics and 3-matic software.

 

Initially I used the Mimics software segmentation tool to segment the normal renal parenchymal tissue. This left a filling defect where the mass was. This negative space was useful for demonstrating the extent of the tumor.

 

Using the 3-matic application I then took the 3D digital representation and created a model cut in the coronal plane. This helped better define the extent of the tumor invasion into the renal hilum.

 

 

RenalMass MRI 3D Whole2

RenalMass MRI 3D CutSection1

 


Both the full kidney and the coronal bisected models were printed for the surgeon and the patient to review. The STL (stereolithography or standard tesselation language) files generated for the 3D models were then imported into both the Cura and MakerBot slicing software applications to generate the gcode for the Ultimaker 2 and .x3g file for the MakerBot printers.

 

Fused filament printing of the full kidney using Acrylonitrile Butadiene Styrene (ABS) on the MakerBot Replicator 2X Experimental Printer and sectioned kidney in Polylactic Acid (PLA) on the Ultimaker 2 printer.

 

In general I prefer PLA to ABS. With PLA there is less shrinkage and warping of the material during the printing process. PLA is of plant based origin (here in the US it is derived from corn starch) and can print lower layer height and sharper printed corners. PLA, a biodegradable plastic is used in medical devices and surgical implants, as it possesses the ability to degrade into inoffensive lactic acid in the body.

 

ABS is a petroleum-based recyclable non-biodegradable plastic. Unfortunately emits a potentially hazardous vapor during printing. The Replicator 2X however is optimized for ABS. http://pubs.acs.org/doi/pdf/10.1021/acs.est.5b04983

 

For more information about PLA/ABS see http://3dprintingforbeginners.com/filamentprimer/#sthash.p07fHBmh.dpuf

 

The urologist showed the models to the patient, and it help to convince her of the necessity of a total nephrectomy, rather than a partial nephrectomy.

 

 

3D printed renal mass

3D printed renal mass section

 


Although the printed models showed the extent of the tumor invasion adequately for both the urologist and the patient to visualize, the models did not differentiate the mass from the renal sinus.

 

 

Renal mass surgical specimen

 


To better demonstrate the tumor invasion, a new model with two different color filaments was created. Hand segmentation of the 3D model of the mass was performed due to the limited tissue contrast between the mass and the surrounding soft tissue structures. Creation of two separate segmentation files and 3D models was made in Mimics.

 

 

coronal renal mass 2 color mimics

 


This was then exported into 3-matic for local smoothing. Two separate STL files of both the mass and kidney were generated. The combined model was then bisected in the coronal plane and the additional two STL files were again generated.

 

 

MR Renal mass 2 color

MR Renal mass 2 color section

 


Once the combined STL files were imported into the MakerBot software, they were repositioned on the build plate in an orientation to optimize the printing process. The STL models were positioned on the bed, above a ring spacer file. This is necessary for the proper printing contact. The model was oriented to minimize the amount of printing support structures.

 

 

Renal mass build plate

 


When using the two filament colors, “purge walls” are generated by the software to help eliminate the small threads of filament from one color being deposited when the next color is laid down.

Renal Mass purge walls

 


The two filament model enables the surgeon and the patient to better visualize the extent of the tumor invasion, clearly demonstrating normal from abnormal tissues.

 

Whole Kidney with Mass

 

Section Kidney with Mass

4 Comments


Recommended Comments

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...